H3C S5800-32F Installation Manual page 84

Figure 5-3 Modify the baud rate
Step3 Select Call > Call to reestablish the connection.
Figure 5-4 Reestablish the connection
The new settings can take effect only after you reestablish the connection.
6) Upload an application file from the terminal to the switch
Step1 After establishing a connection between the terminal and the switch, press Enter in the HyperTerminal
window to enter the system file downloading state. The following information is displayed:
Now please start transfer file with XMODEM protocol.
If you want to exit, Press <Ctrl+X>.
Loading ...CCCCCCCCCC
5-8