Loading Software Using Tftp - H3C S5800-32F Installation Manual

N]:y
Now updating bootrom, please wait...
Step3 Load the application file, and specify the file as the main program file.
<H3C> boot-loader file update.bin slot 1 main
This command will set the boot file of the specified board. Continue? [Y/N]:y
The specified file will be used as the main boot file at the next reboot on slot 1!
<H3C> display boot-loader
Slot 1
The current boot app is:
The main boot app is:
The backup boot app is:
<H3C> reboot
After loading the application file, use the reboot command to restart the switch to make the update
take effect (make sure you have saved other configurations before restart).
If the flash memory does not have enough space, you can load the Boot ROM file first, and then
delete certain application files from the flash memory (you are recommended to delete the unused
host program files); then, load the application file to the switch through FTP for update.
Avoid any power failure during the loading process.

Loading Software Using TFTP

Loading a file through TFTP is similar to loading a file through FTP. The switch can serve only as a
TFTP client that downloads the file from the TFTP server to its flash memory. The procedure after
download is the same as loading the file remotely through FTP.
flash:/update.bin
flash:/update.bin
flash:/update.bin
5-20