About This Manual - H3C S5800-32F Installation Manual

About This Manual

Organization
H3C S5800 Series Ethernet Switches Installation Manual is organized as follows:
Chapter
1 Product Overview
2 Installation Preparations
3 Installing a Switch
4 Initial Power-On
5 Loading Software
6 Maintenance and
Troubleshooting
Appendix
Conventions
The manual uses the following conventions:
GUI conventions
Convention
< >
[ ]
/
Symbols
Convention
Briefly introduces the appearance, system description, as well as the
features and applications of the H3C S5800 series switches.
Describes the requirements
recommendations before and during installation, and the required
tools.
Covers the procedures for installing the H3C S5800 series, ground
wire connection, power module installation, interface module
installation, and so on.
Helps you get familiar with the basic knowledge of how to boot and
configure the H3C S5800 series, including device startup, power-on,
and initialization of system files, and so on.
Introduces how to loading application files and upgrading the Boot
ROM program by using the host software package.
Introduces how to maintain software and hardware of the H3C S5800
series.
Appendix A: Lightning protection of the H3C S5800 series switch.
Appendix B: Obtaining Support for your Product.
Button names are inside angle brackets. For example, click <OK>.
Window names, menu items, data table and field names are inside
square brackets. For example, pop up the [New User] window.
Multi-level menus are separated by forward slashes. For example,
[File/Create/Folder].
Means reader be extremely careful. Improper operation may cause
bodily injury.
Means reader be careful. Improper operation may cause data loss or
damage to equipment.
Means a complementary description.
Contents
on installation
Description
Description
site, the safety