Adjusting Clock And Phase (Vga Only) - Wacom CINTIQ 12WX - OTHER User Manual

12WX_Manual.fm Page 34 Thursday, September 13, 2007 3:38 PM

ADJUSTING CLOCK AND PHASE (VGA ONLY)

Some computers and video cards may not allow the auto-sync function to fully work when Cintiq is first
connected. If some portion of text appears blurred, open the OSD menu, go to the VGA I
and select A A
UTO DJUST
the procedure below. For optimal display quality, set your video card to Cintiq's native resolution of
1280 x 800 pixels.
• In the Wacom Tablet control panel, select the
C tab.
ALIBRATE
• If you are working with multiple displays, be
sure the display corresponding to Cintiq is
selected in the M
ONITOR
• Click on the C
ALIBRATE
calibration screen.
• Using the OSD controls, open the OSD main
menu. Select the I
MAGE
Then adjust the clock level so that the pattern
of fine vertical stripes displays evenly. (For
details on changing the OSD settings, see On
Screen Display (OSD) settings on page 30.)
• Next, in the OSD menu select the I
P options. Adjust the phase level so that
HASE
the adjustment pattern shows clearly.
• After completing these adjustments, exit the
OSD menu.
• Click on the C
ANCEL
the calibration screen.
Adjustment pattern for clock and phase.
Customizing
Page 34
. If the image is still blurred, adjust the clock and phase manually by following
menu.
... button to activate the
and C options.
LOCK
and
MAGE
button or press E to exit
SC
menu,
MAGE