Adjusting Pitch And Phase (Vga Only); Interactive Pen Display - Wacom DTU-1631 User Manual

Interactive pen display

ADJUSTING PITCH AND PHASE (VGA ONLY)

Some computers and video cards may not allow the auto-sync function to fully work when the interactive
pen display is first connected. If some portion of text appears blurred, use the A
automatically synchronize to the incoming signal (see
image is still blurred, adjust pitch and phase by following the below procedure. For optimum display
quality, set your video card to the maximum (native) resolution that can be used with your pen display.
See the product specifications
1. In the Wacom Tablet control panel, select
the C tab.
ALIBRATE
2. If you are working with multiple displays,
be sure the option corresponding to the
pen display is selected in the M
menu.
3. Click on the C
ALIBRATE
activate the calibration screen.
4. Using the OSD controls, open the OSD
menu and select the P
Then adjust the pitch level so the pattern
of fine vertical stripes displays evenly.
5. In the OSD menu, select the P
option. Adjust the phase level so the
adjustment pattern shows clearly.
6. After completing these adjustments,
press the E and M
NTER
the OSD menu.
7. Click on the C
ANCEL
to exit the calibration screen.
Contents Index
for details.
ONITOR
... button to
option.
ITCH
HASE
buttons to exit
ENU
button or press E
SC
Contents Index
factory presets, auto-sync, and user
Adjustment pattern for pitch and phase.
31
A option to
UTO DJUST
settings). If the
31