Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for MONARCH INSTRUMENT POCKET-TACH 100
Summary of Contents for MONARCH INSTRUMENT POCKET-TACH 100
- Page 1 MONARCH INSTRUMENT Instruction Manual POCKET-TACH 100 Printed in the U.S.A. 15 Columbia Drive Amherst, NH 03031 USA © Monarch Instrument 2001 all rights reserved Phone: (603) 883-3390 Fax: (603) 886-3300 1071-4834-001 E-mail: sales@monarchinstrument.com Rev 1.4 Website: www.monarchinstrument.com...
-
Page 2: Declaration Of Conformity
Product: Hand Held Tachometer Making measurements in direct contact with ro- Model: POCKET-TACH 100 tating equipment can be dangerous. Keep all loose clothing and hair away from exposed mov- to which this declaration relates is in conformity with the following standards: ing machinery. -
Page 3: Options And Accessories
POCKET-TACH 100) Introduction ..............1 CTA-1 Contact Tip Assembly with convex and concave tips for Non-Contact Measurements ........... 2 POCKET-TACH 100 only Contact Measurements ........... 3 CT-TIPS One CT-2P convex tip, one CT-3C concave tip and 1 set ® fasteners of Nylatch Battery ................ -
Page 4: Specifications
INTRODUCTION POCKET-TACH is a precision microprocessor-controlled digital instrument, POCKET-TACH 100 is a precision instrument designed to make non-con- which requires no calibration. However, the accuracy of POCKET-TACH tact measurements of rotational speeds from 5 to 100,000 RPM, at a dis- can be verified at any time by aiming it at a fluorescent light and observing tance of up to 30 inches (0.75m) from a reflective target and at an angle of... -
Page 5: Non-Contact Measurements
For surface speed measurements, gently contact the side NON-CONTACT MEASUREMENTS of the concave tip flat against the surface of the object Preparation to be measured. To prepare a shaft for non-contact measurement of speed, carefully NOTE: Only a moderate amount of pressure is required to keep clean an area of the shaft of all grease and dirt and apply a piece of the contact tip in contact with the moving object. -
Page 6: Contact Measurements
Keep the hand holding the instrument well behind the back edge of the Contact Tip Assembly. Do not use this instru- ment for contact measurements that exceed POCKET-TACH 100 20,000 RPM or 20,000 IPM. Insert sight bars into notch To make a measurement: Start the moving object to be measured.
Need help?
Do you have a question about the POCKET-TACH 100 and is the answer not in the manual?
Questions and answers