Delta Electronics AC Motor Drive VFD007S23A User Manual page 70

Output Signal during Running
Applications
General application
Output Signal in Zero Speed
Applications
General application
Output Signal at Desired Frequency
Applications
General application
Over-torque Detection
Applications
Pumps, fans and
extruders
Output Signal at Low-voltage
Applications
General application
Revision August 2006, SE08, SW V2.61
Purpose
Provide a signal for
running status
Purpose
Provide a signal for
running status
Purpose
Provide a signal for
running status
Purpose
To protect
machines and to
have continuous/
reliable operation
Purpose
Provide a signal for
running status
Functions
Signal available to stop braking (brake
release) when the AC motor drive is
running. (This signal will disappear
when the AC motor drive is free-
running.)
Functions
When the output frequency is lower
than the min. output frequency, a
signal is given for external system or
control wiring.
Functions
When the output frequency is at the
desired frequency, a signal is given for
external system or control wiring.
Functions
The over-torque detection level can be
set. Once over-torque occurs, a signal
will occur to prevent the AC motor
drive damage.
Functions
When the voltage between P-N is low
voltage, a signal is given for external
system or control wiring.
Chapter 5 Parameters|VFD-S Series
Parameters
Parameters
Parameters
Parameters
Parameters
Related
3-05~3-06
Related
3-05~3-06
Related
3-05~3-06
Related
3-05~3-06
6-04
6-05
Related
3-05~3-06
5-15