Delta Electronics AC Motor Drive VFD007S23A User Manual page 38

Terminal
Symbol
M4 Multi-function input 4
M5 Multi-function Input 5
+17V DC Voltage Source
GND Digital Signal Common
AFM Analog output meter
Multi-function Relay output
RA
(N.O.) a
Multi-function Relay output
RB
(N.C.) b
RC Multi-function Relay common
Multi-function Output 1
MO1
(Photocoupler)
MCM Multi-function output common Max. 48Vdc 50mA
+10V Potentiometer power supply
Revision August 2006, SE08, SW V2.61
Terminal Function
Chapter 2 Installation and Wiring|VFD-S Series
Factory Settings (NPN mode)
ON: Connect to GND
+17VDC, 20mA used for PNP mode.
Common for digital inputs and used for NPN
mode.
AFM circuit
Internal Circuit
Resistive Load:
5A(N.O.)/3A(N.C.) 240VAC
5A(N.O.)/3A(N.C.) 24VDC
Inductive Load:
1.5A(N.O.)/0.5A(N.C.) 240VAC
1.5A(N.O.)/0.5A(N.C.) 24VDC
Refer to Pr.3-06 for programming
Maximum 48VDC, 50mA
Refer to Pr.3-01 for programming
MO1-DCM
internal circuit
+10VDC 10mA (variable resistor: 3~5kohm)
AFM
0~10V
ondometer
Max. 2mA
GND
Max: 48Vdc
50mA
Mo1
MCM
2-25