Cosmo COS-GRC366KB Installation Instructions Manual page 57

This range is factory-set for use with Natural gas (NG). The Propane gas (LP)
conversion kit is sold separately. To order LP conversion kit, see "Optional
Parts" in the "Tools and Parts" section.
IMPORTANT: Gas conversions must be done by a qualified service technician
in accordance with the manufacturer's instructions and all codes and
requirements of the authority having jurisdiction. The qualified agency
performing this work assumes the gas conversion responsibility.
Keep and store the regulator cap that has just been replaced in case of re-
installation with another gas.
CONVERT GAS PRESSURE REGULATOR
1. Turn manual gas shut-off valve to the closed position.
2. Unplug range or disconnect power.
3. Locate the regulator cap for correct fuel type being used.
NG regulator cap
NOTE:
• NG: This range is factory-set with the NG regulator cap installed. If
converting back for NG from LP, retrieve the NG regulator cap
removed and stored from previous conversion.
• LP: Locate the LP regulator cap from LP conversion kit.
LP regulator cap
57