Cisco CP-7931G User Manual page 54

If you want to... Then...
Log in to EM 1. Choose
2. Enter your user ID and PIN (provided by your system administrator).
3. If prompted, select a device profile.
Log out of EM 1. Choose
2. When prompted to log out, press Yes.
Change your PIN 1. Choose
using the Change
2. Enter your User ID in the User ID field.
Credentials
3. Enter your PIN in the Current PIN field.
service
4. Enter your new PIN in the New PIN field.
5. Enter your new PIN again in the Confirm PIN field.
6. Press Change.
7. Press Exit.
Change your PIN 1. Choose
using the
2. Press ChangePIN.
ChangePIN
3. Enter your PIN in the Current PIN field.
softkey
4. Enter your new PIN in the New PIN field.
5. Enter your new PIN again in the Confirm PIN field.
6. Press Change.
7. Press Exit.
Tips
• EM automatically logs you out after a certain amount of time. Your system administrator
establishes this time limit.
• Changes that you make to your EM profile from your Cisco Unified CM User Options web pages
take effect immediately if you are logged in to EM on the phone; otherwise, changes take effect
the next time you log in.
• Changes that you make to the phone from your User Options web pages take effect immediately
if you are logged out of EM; otherwise, changes take effect after you log out.
• Local settings controlled by the phone are not maintained in your EM profile.
48
)> Services > EM Service (name can vary).
(
)> Services > EM Service (name can vary).
(
)> Services > Change Credentials.
(
You will see a PIN Change Successful message.
)> Services > EM Service (name can vary).
(
You will see a PIN Change Successful message.
OL-22334-01