Basic Call Handling; Placing A Call-Basic Options - Cisco CP-7931G User Manual

Basic Call Handling

You can perform basic call-handling tasks using a range of features and services. Feature availability
can vary; see your system administrator for more information.
Placing a Call—Basic Options
Here are some easy ways to place a call on your Cisco Unified IP Phone.
If you want to...
Place a call using the handset
Place a call using the
speakerphone
Place a call using a headset
Redial a number
Dial from a call log
Tips
• You can dial on-hook, without a dial tone (pre-dial). To pre-dial, enter a number, then go off-hook
by lifting the handset, pressing Dial, or pressing
• When you pre-dial, your phone tries to anticipate the number you are dialing by displaying
matching numbers (if available) from your Placed Calls log. This is called Auto Dial. To call a
number displayed with Auto Dial, scroll to it and go off-hook or press the Select button.
Cisco Unified IP Phone 7931G Phone Guide for Cisco Unified Communications Manager 8.5(1) (SCCP and SIP)
Then...
Pick up the handset and enter a number.
Press and enter a number.
Press ( ) and enter a number.
(Typically, button 23 is assigned to
the headset.)
Press to dial the last number.
1. Press ) > Directories.
(
2. Choose Missed Calls, Received
Calls, or Placed Calls.
3. Press Dial.
For more information,
see...
Using a Handset,
Headset, and
Speakerphone, page 53
Using a Handset,
Headset, and
Speakerphone, page 53
Using a Handset,
Headset, and
Speakerphone, page 53
Placing a Call—Basic
Options, page 19
Using Call Logs, page 59
( ) or .
19