Viewing Or Removing Conference Participants; Placing Or Receiving Intercom Calls - Cisco CP-7931G User Manual

Viewing or Removing Conference Participants

During a standard (ad hoc) conference, you can view a list of participants and remove participants.
View a list of conference
participants
Get an updated list of
conference participants
See who initiated the
conference
Remove any conference
participant
Drop the last participant
added to the conference
Verify that a conference call is
secure
Verify that a participant is
calling from a secure phone
Add more participants

Placing or Receiving Intercom Calls

You can make an intercom call to a target phone that auto-answers the call in speakerphone mode with
mute activated. The one-way intercom call allows you to deliver a short message to the recipient. If
the recipient's handset or headset is in use, the audio is sent to the device in use. Any current call
activity that your recipient is engaged in continues simultaneously.
The target destination receives an intercom-alert tone and can then choose to:
• Listen to the caller with your microphone muted (you can hear the caller, but the caller cannot
hear you).
• End the intercom call by pressing the EndCall softkey with the intercom call in focus. Do this if
you do not want to hear the message.
• Talk to the caller by pressing the active intercom button and using either the handset, headset or
speaker. The intercom call becomes a two-way connection so that you can converse with the caller.
Cisco Unified IP Phone 7931G Phone Guide for Cisco Unified Communications Manager 8.5(1) (SCCP and SIP)
Press ConfList or Conference List.
Participants are listed in the order in which they join the conference
with the most recent additions at the top.
Note The conference participants list, ConfList, displays a maximum
of 16 participants. Though users can add as many conference
participants as the conference bridge supports, ConfList displays
16 participants only. As new participants join the conference,
ConfList displays only the last 16 participants who have joined.
While viewing the conference list, press Update.
While viewing the conference list, locate the participant listed at the
bottom of the list with an asterisk (*) next to the name.
While viewing the conference list, highlight the participant's name
and press Remove.
While viewing the conference list, press RMLstC or Remove Last
Participant.
Look for the or
phone screen.
Look for the or
phone screen.
See Using Conference, page
icon after "Conference" on the
icon beside the participant's name on the
32.
Basic Call Handling
35