If you want to...
Add a service to an
available
programmable phone
button
Access a service on
your phone
Controlling User Settings on the Web
User settings include your password, PIN, and language (locale) settings.
If you want to...
Change your password
Change your PIN
Cisco Unified IP Phone 7931G Phone Guide for Cisco Unified Communications Manager 8.5(1) (SCCP and SIP)
Then do this after you log in...
1. Choose User Options > Device.
2. Choose a phone from the Name drop-down menu.
3. Click Service URL.
Note
If you do not see this option, ask your system administrator to
configure a service URL button for your phone.
4. Choose a service from the Button Service drop-down list.
5. If you want to rename the service, edit the label fields.
Note
Your phone uses the ASCII Label field if the phone does not support
double-byte character sets.
6. Click Save.
7. Click Reset to reset your phone (necessary to see the new button label
on your phone).
Use the line key buttons to select the Services, Messages, and
Directories menus:
(
) > Services
) > Messages
(
(
> Directories
)
If only one service is configured, the service opens by default.
If more than one service is configured, select a menu option on the screen.
Note
The services available for your phone depend on the phone system
configuration and the services you subscribed to. For more
information, ask your phone system administrator.
Then do this after you log in...
1. Choose User Options > User Settings.
2. In the Browser Password area, enter information.
3. Click Save.
1. Choose User Options > User Settings.
2. In the Phone PIN area, enter information.
3. Click Save.
Using the User Options Web Pages
73