Configuring Fast Dials On The Web - Cisco CP-7931G User Manual

If you want to...
Delete a PAB entry
Assign a line button for PAB Note

Configuring Fast Dials on the Web

This section describes how to assign Fast Dials from your User Options web pages.
If you want to...
Assign a Fast Dial code
to a PAB entry
Assign a Fast Dial code
to a phone number
(without using a
PAB entry)
Cisco Unified IP Phone 7931G Phone Guide for Cisco Unified Communications Manager 8.5(1) (SCCP and SIP)
Then do this after you log in...
1. Search for a PAB entry.
2. Select one or more entries.
3. Click Delete Selected.
Before you can assign a line button for PAB, your system
administrator must configure the phone to display services.
Contact your system administrator for more information.
1. Choose User Options > Device.
2. Click Service URL.
3. Choose the Personal Address Book service from the Button
drop-down list box.
4. Enter a phone label for the button.
5. Click Save.
6. Click Reset and then click Restart to refresh the phone
configuration.
You can now press the line button to access PAB codes.
Then do this after you log in...
1. Create a PAB entry. See
Web, page 68.
2. Choose User Options > Fast Dials.
3. Click Add New.
4. Use the Search Options area to find the appropriate PAB entry.
5. Click a phone number in the Search Results area.
6. Change the Fast Dial code, if desired.
7. Click Save.
1. Choose User Options > Fast Dials.
2. Click Add New.
3. Change the Fast Dial code, if desired.
4. Enter a phone number.
5. Click Save.
Using the User Options Web Pages
Using Your Personal Address Book on the
69