Viewing Or Removing Conference Participants; Placing Or Receiving Intercom Calls - Cisco 7941G-GE - IP Phone VoIP Phone Manual

Viewing or Removing Conference Participants

During a standard (ad hoc) conference, you can view a list of participants and remove participants.
View a list of conference
participants
Get an updated list of
conference participants
See who initiated the
conference
Remove any conference
participant
Drop the last participant
added to the conference
Verify that a conference call is
secure
Verify that a participant is
calling from a secure phone
Add more participants

Placing or Receiving Intercom Calls

You can make an intercom call to a target phone that auto-answers the call in speakerphone mode with
mute activated. The one-way intercom call allows you to deliver a short message to the recipient. If
the recipient's handset or headset is in use, the audio is sent to the device in use. Any current call
activity that your recipient is engaged in continues simultaneously.
The target destination receives an intercom-alert tone and can then choose to:
• Listen to the caller (you can hear the caller, but the caller cannot hear you).
• End the intercom call by pressing the EndCall softkey with the intercom call in focus. Do this if
you do not want to hear the message.
• Talk to the caller by pressing the active intercom button and using either the handset, headset or
speaker. The intercom call becomes a two-way connection so that you can converse with the caller.
When using the intercom feature, be aware of the following:
• From an intercom line, you can only dial other intercom lines.
• You can use only one intercom line at a time.
• When your active call is being monitored or recorded, you cannot receive or place intercom calls.
• You cannot place an intercom call on hold.
30
Press ConfList or Conference List.
Participants are listed in the order in which they join the conference
with the most recent additions at the top.
While viewing the conference list, press Update.
While viewing the conference list, locate the participant listed at the
bottom of the list with an asterisk (*) next to the name.
While viewing the conference list, highlight the participant's name
and press Remove.
While viewing the conference list, press RMLstC or Remove Last
Participant.
Look for the or
screen.
Look for the or
phone screen.
See Using Conference, page
icon after "Conference" on the phone
icon beside the participant's name on the
27.
OL-14683-01