Table of Contents
Advertisement
Chapter 3
Configuring the Cisco ATA for H.323
In hexadecimal format, this value is 0x00000052.
Set bits 18-29 of the VLANSetting parameter to to voice VLAN ID 115. This setting translates to the
Step 2
following bitmap
xx00 0001 1100 11xx xxxx xxxx xxxx xxxx
where 000001110011 is the binary representation of the demical value 115.
The remaining bits of the VLANSetting parameter, using all default values, make up the following
representation:
00xx xxxx xxxx xx00 0000 0000 0010 1011
Therefore, the resulting value of the VLANSetting parameter becomes the following bitmap
representation:
0000 0001 1100 1100 0000 0000 0010 1011
In hexadecimal format, this value is 0x01cc002b.
If you are using the voice configuration menu to set the parameters, you must convert hexadecimal
Note
values to decimal values. For example, the OpFlags setting of 0x00000052 is equivalent to 82 in decimal
format, and the VLANSetting of 0x01cc002b is equivalent to 30146603 in decimal format.
Steps Needed to Configure the Cisco ATA
This section contains the following topics:
•
•
Basic Configuration Steps in a TFTP Server Environment
Table 3-3
H.323 environment, which includes a TFTP server.
OL-4804-01
Basic Configuration Steps in a TFTP Server Environment, page 3-5
Basic Configuration Steps in a Non-TFTP Server Environment, page 3-7
shows the basic steps for configuring the Cisco ATA and making it operational in a typical
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator's Guide for H.323 (version 3.0)
Steps Needed to Configure the Cisco ATA
3-5
Advertisement
Table of Contents
