Cisco ATA186-I2 Administrator's Manual page 12

Organization
Organization
Table 1
Table 1 Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator's Guide (H.323) Organization
Chapter
Chapter 1, "Cisco Analog Telephone Adaptor Overview"
Chapter 2, "Installing the Cisco ATA"
Chapter 3, "Configuring the Cisco ATA for H.323"
Chapter 4, "Basic and Additional H.323 Services"
Chapter 5, "Parameters and Defaults"
Chapter 6, "Call Commands"
Chapter 7, "Configuring and Debugging Fax Services"
Chapter 8, "Upgrading the Cisco ATA Signaling Image"
Chapter 9, "Troubleshooting"
Appendix A, "Using H.323 Supplementary Services"
Appendix B, "Voice Menu Codes"
Appendix C, "Cisco ATA Specifications"
Appendix D, "H.323 Signaling"
Appendix E, "Recommended Cisco ATA Tone Parameter
Values by Country"
Glossary
Index
Conventions
This document uses the following conventions:
•
•
•
•
•
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator's Guide for H.323 (version 3.0)
xii
provides an overview of the organization of this guide.
Alternative keywords are grouped in braces and separated by vertical bars (for example, {x | y | z}).
Arguments for which you supply values are in italic font.
Commands and keywords are in boldface font.
Elements in square brackets ([ ]) are optional.
Information you must enter is in
Description
Provides descriptions of hardware and software features of
the Cisco ATA Analog Telephone Adaptor along with a brief
overview of the H.323 protocol.
Provides information about installing the Cisco ATA.
Provides information about configuring the Cisco ATA and
the various methods for configuration.
Provides information about H.323 services that the
Cisco ATA supports.
Provides information on all parameters and defaults that you
can use to configure the Cisco ATA.
Provides the Cisco ATA call commands for H.323.
Provides instructions for configuring both ports of the
Cisco ATA to support fax transmission.
Provides instructions for remotely upgrading Cisco ATA
software.
Provides basic testing and troubleshooting procedures for the
Cisco ATA.
Provides end-user information about pre-call and mid-call
services.
Provides a quick-reference list of the voice configuration
menu options for the Cisco ATA.
Provides physical specifications for the Cisco ATA.
Provides Cisco ATA call flows for H.323 scenarios.
Provides tone parameters for various countries.
Provides definitions of commonly used terms.
Provides reference information.
font.
boldface screen
Preface
OL-4804-01