Related Manuals for Glow Bricks LEGO 80116
Summary of Contents for Glow Bricks LEGO 80116
- Page 2 Before the installation, split the lantern by layers Get the 1x4 lighting plate next to the USB plug and assemble it at the back shown in blue circle, make sure the direction has to be same as the picture below...
- Page 3 Place the other two 1x4 lighting plates on the rack and the wires in between the studs, assemble the 1x8 lighting plate under the middle of the rack (blue circle) Restore the red tiles on both sides and assemble the lighting round plates under the gold round plates (blue circle)
- Page 4 Place the USB cable out from the back Assemble the white lighting plates under the top as shown Make sure the position and direction of the plates follow the picture below...
- Page 5 Restore the middle layer and remove the shown parts Then restore the top and the wire can get through by the space then put the removed parts back...
- Page 6 Assemble the led bulb inside the red clear round block On the other side assemble the 1x1 lighting plates on the booth...
- Page 7 In the middle, assemble the lighting round plates under the gold round plates At least assemble the red lighting round plates on the top *Remember if you wanna spin the pole you need to detach the lighting round plate first...
Need help?
Do you have a question about the LEGO 80116 and is the answer not in the manual?
Questions and answers