Advertisement
Quick Links
Advertisement
Related Manuals for Glow Bricks McLaren Forumla 1 Race Car Lego 42141
Summary of Contents for Glow Bricks McLaren Forumla 1 Race Car Lego 42141
- Page 1 McLaren Forumla 1 Race Car...
- Page 2 Take the shown lighting part and start assembling from the rear...
- Page 3 Remove the clear red tile from the model and place it on the lighting part Assemble the brake light then stick the two short lighting tiles at the rear spoiler...
- Page 4 Then assemble the remain four lighting tiles at the bottom of the car Now for the other lighting parts...
- Page 5 Start from the lighting liftarms, turn upside down the car and assemble them as shown For the 1x2 lighting tile follow by the liftarm, assemble it at the middle as shown...
- Page 6 Move the lights on the side, remove the shown parts Stick the four lighting tiles at the following position...
- Page 7 Pull the black 1x2 lighting plate to the pilot seat area Then assemble it at the red circle place...
- Page 8 In the red circle area there’s a hole, you may pass the rest of lighting parts through the hole to the other side Then stick the lights, just like the same way as the other side...
- Page 9 To light it up, you can power by USB or battery...
Need help?
Do you have a question about the McLaren Forumla 1 Race Car Lego 42141 and is the answer not in the manual?
Questions and answers