Subscribe to Our Youtube Channel
Related Manuals for Glow Bricks Lego 42156 PEUGEOT 9x8
Summary of Contents for Glow Bricks Lego 42156 PEUGEOT 9x8
- Page 2 Start from removing the cover at the back and get the red lighting tiles...
- Page 3 Remove the shown parts and stick the lighting tiles with connector attached at the brake lights, remember the wires connecting to other lighting tiles should be facing at bottom Remove the shown parts, move the remain lighting tiles to the left and assemble them...
- Page 4 Place the wire at middle to be stable and less visible then you can restore all the parts For the connector, it would be placed differently depends on which kind of power source you want to use Move the connector to the driver seat if you want to power by battery...
- Page 5 If you want to power by USB, please move the connector to the bottom of the car There’s a hole right besides the engine Now it’s turn for the front, remove the white bars at the front light and replace the slopes by the lighting parts...
- Page 6 Do the same procedure for the other side, then hide the wires in between them on top of the front logo area...
- Page 7 For the remain lighting tile, open the front cover and move it inside the seat area Then stick it on the top as shown...
- Page 8 To power by USB, connect the USB cable with the connectors at the bottom of the car If powered by battery, connect the plugs with the battery case, then place the case on the seat...
Need help?
Do you have a question about the Lego 42156 PEUGEOT 9x8 and is the answer not in the manual?
Questions and answers