Advertisement
Quick Links
Advertisement
Related Manuals for Glow Bricks HarryPotter Hogwarts Express Collector's Edition Lego 76405
Summary of Contents for Glow Bricks HarryPotter Hogwarts Express Collector's Edition Lego 76405
- Page 1 Hogwarts Express Collector’s Edition...
- Page 2 Take the shown lighting parts for the platform...
- Page 3 Check out the 1x2 at the end side of the set and assemble these five plates Remove the shown poles and assemble the lighting plates mentioned above...
- Page 4 Turn around the model and assemble the 2pcs of 1x8 lighting plates Remove the shown tiles and the parts, then move the remain lighting plates to the top and assemble them...
- Page 5 Stick the 1x1 lighting tiles at the doorway like this and remember to place the wires between the studs to avoid getting broken when restoring the tiles...
- Page 6 Now restore the removed tiles...
- Page 7 Turn back to the front side and assemble the led bulbs on the lamps Take the white ball away, place the bulb on the black lamp stand and restore the ball...
- Page 8 Now assemble the light for the last vehicle, take the lighting part with 2 red plates...
- Page 9 Before assembling, remove the top of the vehicle by the following way And the installation will be started from the side in the red circle...
- Page 10 Find the red lighting plate next the the connector and assemble it on the shown top The direction must be same as the picture below Restore the top, arrange the grey 1x4 plates to the seat side And place the connector out of the train through the rear door...
- Page 11 Assemble the black lighting plates on the black parts and restore the tops...
- Page 12 After restoring the tops, assemble the remain red and black lighting plates to the end The yellow lighting round plates will be assembled above the seats Before that remove the black fences and the yellow round plates from the wall...
- Page 13 Now assemble all 9pcs of lighting yellow round plates Now combine the house, before that place the remain parts through the hole except the brown 1x2 plates...
- Page 14 Restore the black fences after the installation of yellow round plates is completed Assemble the 3pcs of grey lighting plates to the removed windows then place them back to the train...
- Page 15 Now it’s turn for the middle vehicle, take the lighting parts with black plates only...
- Page 16 Turn the vehicle upside down, remove the shown parts and assemble the lights Place the wire in between the plates neatly...
- Page 17 Move the remain 2 lighting plates to the other side and restore the removed parts Repeat the same procedure on the other side...
- Page 18 At last, stable the wire at the bottom by the brown 1x3 plate as shown...
- Page 19 Assemble the remain lighting parts Remove the top of the rear side, and get the 1x6 lighing plate in the middle Then split the remain lighting plates equally for both side...
- Page 20 Assemble the 1x6 at the removed top Arrange the connect to the back and the remain lights to the front...
- Page 21 Place the top back to the train, assemble the 1x3 lighting plate at the bottom and hide the wire in between at the corner in the blue circle Then keep assembling the red lighting plates...
- Page 22 Assemble red lighting plates on the other side Now remove the shown parts to assemble the red lighting round plate on the pipe...
- Page 23 At last replace the round plates at the front by the lighting parts then restore the removed tiles Now you can combine the train and connect 3 plugs with the USB cable...
Need help?
Do you have a question about the HarryPotter Hogwarts Express Collector's Edition Lego 76405 and is the answer not in the manual?
Questions and answers