Page 2
Start the installation from the top, remove the shown parts as the first step...
Page 3
Assemble the red lighting round plate at the top, then hide the wire in between the grey plates Then restore the parts removed at the first step...
Page 4
Then assemble the 2x3 lighting plate underneath the head, and move the remain parts to the bottom, the wire should be follow by the neck...
Page 5
Now stick the lighting grey tile at the bottom of the model Beware of direction, the wire attached with the remain parts should face the front Assemble the two black lighting plates at the front feet, check out the direction by the position of the USB cable should come out at the left side...
Page 6
Replace the bricks look like traffic light by the lighting part The wire can be tied around the pole Then switch the clear black round tiles from the model to put on the lights...
Page 7
Assemble the remain lighting round plates Start from the blue one, replace the one on the dog’s head Then assemble the red lighting round plates on the red flowers...
Page 8
Then the green lighting round plates At last, move the yellow lighting round plates to the tree and put them on the tree randomly...
Page 9
Finally, connect the USB cable to power up the lights...
Need help?
Do you have a question about the FORBIDDEN WEST HORIZON Lego 76989 and is the answer not in the manual?
Questions and answers