Freecom VALUELOADER DLT User Manual page 79

Error Code Description
Cartridge Pick Error.
3 0 A3
3 0 A4 Import/Export Slot Position
Error.
Fan Error.
3 0 A5
ROM Error.
3 0 B0
RAM Error.
3 0 B1
NVRAM Error.
3 0 B2
3 0 B3 Controller Timer Failure.
Loader to Drive
3 0 B4
Communication IC Error.
Display Error.
3 0 B5
Memory Error.
3 0 B6
ValueLoader DLT VS80/DLT VS160 Tape Autoloader User Manual
Diagnostics and Troubleshooting
Details
An error occurred while trying to pull a
cartridge from the drive or a carousel slot.
The Import/Export slot door was not in the
requested position during device operation.
Can be caused by manually opening the door
or a cartridge or other obstruction is blocking
the door. Try removing the cartridge or
obstruction, then power cycle or reset the
ValueLoader.
The ValueLoader processor detected a fan
error.
Cycle power on the ValueLoader and attempt
the operation again. If the error recurs, contact
Technical Support.
Cycle power on the ValueLoader and attempt
the operation again. If the error recurs, contact
Technical Support.
Cycle power on the ValueLoader and attempt
the operation again. If the error recurs, contact
Technical Support.
An unrecoverable failure has occurred in the
controller timer circuit.
A failure in IC handling loader to drive
communication.
Cycle power on the ValueLoader and attempt
the operation again. If the error recurs, contact
Technical Support.
Cycle power on the ValueLoader and attempt
the operation again. If the error recurs, contact
Technical Support.
ValueLoader Error Codes
65