Freecom VALUELOADER DLT User Manual page 32

Installing the ValueLoader
Preparing the Host and Verifying the Connection
18 ValueLoader DLT VS80/DLT VS160 Tape Autoloader User Manual
ValueLoader Device Driver (Windows 2000)
To install the ValueLoader device driver:
Make sure that you are logged on to the host server with
1
Administrator privileges.
Right-click the
2 My Computer
click , then click
Manage
The ValueLoader should be listed under the "Medium
3
Changers" item as "Unknown Medium Changer Device."
Right-click the
4 Unknown Medium Changer Device
, and then click the
Uninstall
want to remove the device.
Click the
5 Action
Computer Management dialog box.
Click
6 Scan for Hardware Changes
ValueLoader DLT VS80 or ValueLoader DLT VS160. The
ValueLoader appears under "Medium Changers" again.
Right-click the
7 Unknown Medium Changer Device
click .
Properties
Select the
8 Drivers
Click the
9 Reinstall Driver
When the Upgrade Device Driver Wizard appears, click the
10
button.
Next
Click
11 Display a list...
Click the
12 Have Disk
saved the device drivers on your system, then click the
button.
Click the
13 DLT VS Medium Changer
button.
Depending on the status of your system and the exact
Note:
path taken to select the device driver, the driver may
appear as
icon on the Windows desktop,
Device Manager
button to confirm that you
OK
button in the upper-left corner of the
. Windows 2000 scans for the
tab.
or
Update Driver
and then click the
button, type the path to where you have
entry and click the
.
Dltvsmc.inf
.
listing, click
listing and
button.
button.
Next
OK
Next
1