Freecom VALUELOADER DLT User Manual page 59

To access this option, follow these steps:
From the Home screen or main menu, press the
1
until "Configuration" appears on the top line of the LCD
screen.
Press the
2 [Enter]
Press the
3 [+]
LCD screen. Press the
If the carousel is full, the LCD screen displays No slot free for
4
transfer. Press the [Cancel] button repeatedly until the main
menu or Home screen is displayed. Export a cartridge to make
room for the firmware update cartridge. See
Cartridges
update the firmware.
If the carousel is not full, the ValueLoader will select the first
5
available slot and prompt you to insert the code update
cartridge.
Insert the code update cartridge into the Import/Export slot.
6
If the cartridge is not a valid code update cartridge,
Note:
The LCD will temporarily display error code
"3 0 BC," the ValueLoader will reset, the cartridge
will be exported, and the LCD displays "Bad upgrade
tape."
During the firmware update, which can take several minutes,
7
the LCD screen displays "Code update in Progress." When the
firmware update is complete, the ValueLoader resets, then
unloads and exports the code upgrade cartridge. Remove the
code upgrade cartridge and press the
LCD screen prompts you to do so.
ValueLoader DLT VS80/DLT VS160 Tape Autoloader User Manual
button to select.
or button until "Code Update" appears on the
[–]
button to select.
[Enter]
on page 29 for instructions. Then return to
ValueLoader Administration
Updating Firmware
or button
[+] [–]
Exporting
step 1
button when the
[Enter]
to
45