Freecom VALUELOADER DLT User Manual page 31

For the VS160 ValueLoader, right-click the
VS160 SCSI Sequential Device
click the
OK
device.
Click the
5 Action
Computer Management dialog box.
Click
6 Scan for Hardware Changes
drive. The drive appears under "? Other Devices" again.
For the VS80 ValueLoader, right-click the
7
SCSI Sequential Device
For the VS160 ValueLoader, right-click the
VS160 SCSI Sequential Device
Select the
8 Drivers
Click the
9 Reinstall Driver
When the Upgrade Device Driver Wizard appears, click the
10
button.
Next
Click
11 Tape Drives
Click the
12 Have Disk
saved the device drivers on your system, then click the
button.
Click the
13 DLT ValueLoader Tape Drive
button.
Depending on the status of your system and the exact
Note:
path taken to select the device driver, the driver may
appear as
Click the
14 Next
Click the
15 Finish
Close the
16 Device Properties
The drive appears in Device Manager under Tape Drives as
17
DLT ValueLoader Tape Drive
ValueLoader DLT VS80/DLT VS160 Tape Autoloader User Manual
Preparing the Host and Verifying the Connection
listing, click
button to confirm that you want to remove the
button in the upper-left corner of the
listing and click
listing and click
tab.
or
Update Driver
and then click the
button. Type the path to where you have
.
Dltvstp.inf
button again to install the driver.
button.
dialog box.
and is now ready to use.
Installing the ValueLoader
QUANTUM DLT
, and then
Uninstall
. Windows 2000 scans for the
BNCHMARK VS640
.
Properties
QUANTUM DLT
Properties
button.
button.
Next
entry and click the
.
OK
Next
17