Freecom VALUELOADER DLT User Manual page 66

Diagnostics and Troubleshooting
Troubleshooting
Table 4
Troubleshooting
Problem
Power
ValueLoader does not
power on.
No display messages
appear.
Tape Movement
52 ValueLoader DLT VS80/DLT VS160 Tape Autoloader User Manual
•
Device Driver Installation:
driver, if applicable, is installed for the ValueLoader (see
Installing the Device Drivers
site for more information.
Solution
• Check all power cord connections.
• Make sure the power switch on the front panel is in the ON
position.
• Make sure there is power to the outlet. Try another working
outlet.
• Replace the power cord.
• Contact your service representative.
• Make sure the power cord is connected.
• Make sure the power switch is on.
• Power cycle the ValueLoader.
• Download ValueLoader firmware.
• Contact your service representative.
Make sure that the proper device
on page 16). Also refer to our Web