Freecom VALUELOADER DLT User Manual page 55

To access this option, follow these steps:
From the Home Screen or main menu, press the
1
button until "Configuration" appears on the top line of the
LCD screen.
Press the
2 [Enter]
Press the
3 [+]
the LCD screen. The second line displays the current SCSI ID.
Press the
4 [Enter]
displays "New ID:".
Press the
5 [+]
Press the
6 [Enter]
Cycle Power."
The ValueLoader will not respond to input from the
Note:
Operator 's Panel until the power has been cycled.
Turn off the ValueLoader. After a few seconds, turn it back on
7
again.
The selected SCSI ID is now in effect.
If you changed the SCSI ID, you may also need to cycle
Note:
power on the host server and reconfigure your backup
software before you can use the ValueLoader. Consult
your hardware and software manuals for more
information.
ValueLoader DLT VS80/DLT VS160 Tape Autoloader User Manual
button to select.
or button until "Change SCSI ID" appears on
[–]
button. The second line on the LCD screen
or button until the desired SCSI ID is displayed.
[–]
button. The LCD screen displays "Please
ValueLoader Administration
Configuring the ValueLoader
or
[+] [–]
41