SMC Networks VBAE10- 02 Series Operation Manual page 11

● If an excessive amount of carbon powder is present, install a mist separator
on the upstream side of the valve.
If excessive carbon dust is generated by the compressor, it may adhere to the
inside of a valve and cause it to malfunction.
2. Pressure fluctuation
● Provide a stable supply of pressure for the inlet pressure.
3. Take measures to ensure air quality, such as by installing an aftercooler,
air dryer, or water separator.
● Compressed air containing a large amount of drainage can cause the malfunction.
Therefore, take appropriate measures to ensure air quality, such as by
providing an aftercooler, air dryer, or water separator.
Caution
!
1. Installation location
● Do not install this product in an area that is exposed to rainwater or direct
sunlight.
● Do not install in locations influenced by vibrations.
● If the booster regulator is frequently operated in a high temperature,
humid environment, condensation may be generated on the outside of
the booster regulator.
1. Draining
● If this product is used with a large amount of drainage accumulated in the
filter, mist separator or tank, the drainage could flow out, leading to
equipment malfunction. Therefore,drain the system once a day. If it is equipped
with an auto drain, check its operation once a day.
2. Maintenance
● Life expectancy varies depending on the quality of air and the operating
conditions. Signs that the unit is reaching the end of its service life include
following.
8．Operating Environment
9．Handling
10