Download Print this page

SMC Networks VCHR Series Operation Manual

6. ompa direct operated regulator (relieving type)

Advertisement

Quick Links

Doc. no.VCH4***-OMK0004-A
NN68285600
PRODUCT NAME
6.0MPa Direct Operated Regulator
(Relieving Type)
MODEL / Series / Product Number
VCHR Series

Advertisement

loading
Need help?

Need help?

Do you have a question about the VCHR Series and is the answer not in the manual?

Questions and answers

Summary of Contents for SMC Networks VCHR Series

  • Page 1 Doc. no.VCH4***-OMK0004-A NN68285600 PRODUCT NAME 6.0MPa Direct Operated Regulator (Relieving Type) MODEL / Series / Product Number VCHR Series...
  • Page 2 Contents 1. Contents ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・P1 2. Safety Instructions ・・・・・・・・・・・・・・・・・・・・・・・・・P2 to 5 3. How to order / Specifications ・・・・・・・・・・・・・・・・・・・・ P6 to 9 4. Troubleshooting ・・・・・・・・・・・・・・・・・・・・・・・・・・ P10 - 1 -...
  • Page 3: Safety Instructions

    Safety Instructions These safety instructions are intended to prevent hazardous situations and/or equipment damage. These instructions indicate the level of potential hazard with the labels of “Caution,” “Warning” or “Danger.” They are all important notes for safety and must be followed in addition to International Standards (ISO/IEC) , and other safety regulations.
  • Page 4: Limited Warranty And Disclaimer/Compliance Requirements

    Safety Instructions Caution We develop, design, and manufacture our products to be used for automatic control equipment, and provide them for peaceful use in manufacturing industries. Use in non-manufacturing industries is not covered. Products we manufacture and sell cannot be used for the purpose of transactions or certification specified in the Measurement Act.
  • Page 5 - 4 -...
  • Page 6 - 5 -...
  • Page 7 - 6 -...
  • Page 8 - 7 -...
  • Page 9 - 8 -...
  • Page 10 - 9 -...
  • Page 11: Troubleshooting

    Troubleshooting This product can not be disassembled. (Refer to “Specific Product Precautions” on page 4.) Failure Possible cause Remedy Phenomenon The pressure can not be 1. The product is mounted 1. Check the flow direction and correct the mount adjusted. reversely to the flow direction of the product.
  • Page 12 Revision history A: Change to latest format Tel: + 81 3 5207 8249 Fax: +81 3 5298 5362 https://www.smcworld.com Note: Specifications are subject to change without prior notice and any obligation on the part of the manufacturer. © SMC Corporation All Rights Reserved...

This manual is also suitable for:

Vchr30Vchr40