HMS CANbridge NT 200 User Manual page 7

Safety Insrucons
2. Safety Insrucons
IMPORTANT
Risk of interference to radio and television if used in oce or home environment!
Use exclusively included accessories. Use exclusively shielded cables.
Make sure, that the shield of the interface is connected with the device plug and the plug on the
other side.
IMPORTANT
Connecon disturbance possible if extension cable or longer cable is used!
HMS recommends connecng the interface directly with the included cable or via an acve USB hub
to the computer according to the USB specicaon.
General Safety Insrucons
• Protect product from moisture and humidity.
• Protect product from too high or too low temperature (see
• Protect product from re.
• Do not paint the product.
• Do not modify or disassemble the product. Service must be carried out by HMS Industrial Networks.
• Store products in dry and dust-free place.
• Only use indoors (without corrosive gas, ammable gas, dust and dirt etc.).
Intented Use
The components are used to connect CAN and CAN FD networks with each other. They are intended for
insallaon on standard DIN rail.
4.01.0331.20000 Version 2.0
Technical Data).
CANbridge NT 200 and 420
Page 3 of 24