AddSecure IRIS-4 Technical Reference Manual page 69

Fit the tamper switch with bracket (either long or short depending on whether the wall spacers have been
used). As shown below, and connect to the tamper inputs of the terminal.
For the T-NG-ENC2A the antenna can either be mounted with the bracket provided or removed from the
bracket and fitted to the enclosure using the knockout on the top of the enclosure. When installed on the
enclosure fit the insulating bushes supplied.
All cables (e. g. tamper switch, Ethernet, antenna) must be secured with cable ties, to prevent easy capture
and tampering of the wires. Use the cable ties provided and the cable tie clip points in the base of the
cabinet.
Once the terminal is installed and working, close and lock the cabinet lid.
IRIS-4 Technical Reference Manual 20/03/2025 page 69