Talk Setting; Microphone Overall Settings - Yamaha Tyros2 Owner's Manual

Talk Setting

This function is ideal for making announcements between your singing performances. When singing a song, several effects such
as reverb, delay and vocal harmony are usually assigned to the MIC/LINE IN Setup. When speaking to your audience, however,
these effects may sound disturbing or unnatural. Whenever the [TALK] button is turned on, Delay and Vocal Harmony effects
turn off and the amount of reverb lowers automatically. Talk settings can be customized as well, allowing you to add any desired
effects to your voice as you speak to your audience. Turning the [TALK] button off automatically recalls the MIC/LINE IN Setup
for singing again.
Select a menu.
Press the [MIC SETTING]
button.
For singing
Talk Setting Parameters
VOLUME
PAN
REVERB DEPTH
CHORUS DEPTH
TOTAL VOLUME ATTENUATOR
DSP MIC ON/OFF
DSP MIC TYPE
DSP MIC DEPTH

Microphone Overall Settings

Press the [MIC SET-
TING] button.
■ 3BAND EQ
EQ (Equalizer) is a processor that divides the frequency spectrum into multiple bands which can be boosted or cut as
required to tailor the overall frequency response. The Tyros2 features a high grade three-band digital equalizer function
for the microphone sound.
● Hz ...............Adjusts the center frequency of the corresponding band.
● dB...............Boosts or cuts the level of the corresponding band by up to 12 dB.
For talking
This determines the output volume of the microphone sound.
This sets the stereo pan position of the microphone sound.
These set the depth of the reverb effects applied to the microphone sound.
These set the depth of the chorus effects applied to the microphone sound.
This determines the amount of attenuation to be applied to the overall
sound (excepting the microphone input)—allowing you to effectively adjust
the balance between your voice and the overall instrument sound.
This turns the DSP effect applied to the microphone sound ON or OFF.
This selects the type of DSP effect to be applied to the microphone sound.
This sets the depth of the DSP effect applied to the microphone sound.
Set each parameter.
If necessary, use the [TAB] buttons
to call up the Talk Setting display.
CAUTION
Settings in the Talk Settings display
are automatically saved to Flash
ROM when you exit from the dis-
play. However, if you turn the power
off without exiting from this dis-
play, the settings will be lost.
If necessary, press the
[TAB] button to call up the
Microphone Overall Set-
tings display.
Select the row at which
the desired parameters
are located by pressing
the corresponding LCD
button.
Reference
Using a Microphone
NOTE
• The settings on the Talk Setting
display can be saved to the User
drive or external devices on the
[FUNCTION] → UTILITY → SYS-
TEM SETUP display as a System
Setup file (page 196)
CAUTION
Settings in the Microphone
Overall Settings display are
automatically saved to Flash
ROM when you exit from the
display. However, if you turn
the power off without exiting
from this display, the settings
will be lost.
177
Tyros2 Owner's Manual