Talk Setting; Microphone Overall Settings - Yamaha TYROS Owner's Manual

Reference
Using a Microphone

Talk Setting

This function is ideal for making announcements between your singing performances. When singing a song, several effects such
as reverb, delay and vocal harmony are usually assigned to the MIC Setup. When speaking to your audience, however, these
effects may sound disturbing or unnatural. Whenever the [TALK] button is turned on, Delay and Vocal Harmony effects turn off
and the amount of reverb lowers automatically. Talk settings can be customized as well, allowing you to add any desired effects
to your voice as you speak to your audience. Turning the [TALK] button off automatically recalls the MIC Setup for singing again.
Select a menu.
MIC
SETTING
Press the [MIC SETTING]
button.
For singing
VOCAL
HARMONY
Talk Setting Parameters
VOLUME
PAN
REVERB DEPTH
CHORUS DEPTH
TOTAL VOLUME ATTENUATOR
DSP MIC ON/OFF
DSP MIC TYPE
DSP MIC DEPTH

Microphone Overall Settings

Press the [MIC SET-
A
TING] button.
B
MIC
SETTING
C
D
E
I 3BAND EQ
EQ (Equalizer) is a processor that divides the frequency spectrum into multiple bands which can be boosted or cut as
required to tailor the overall frequency response. The TYROS features a high grade three-band digital equalizer function
for the microphone sound.
G Hz ...............Adjusts the center frequency of the corresponding band.
G dB...............Boosts or cuts the level of the corresponding band by up to 12 dB.
132
TYROS Owner's Manual
For talking
MIC
VOCAL
TALK EFFECT TALK
HARMONY
This determines the output volume of the microphone sound.
This sets the stereo pan position of the microphone sound.
These set the depth of the reverb effects applied to the microphone sound.
These set the depth of the chorus effects applied to the microphone sound.
This determines the amount of attenuation to be applied to the overall
sound (excepting the microphone input) — allowing you to effectively ad-
just the balance between your voice and the overall instrument sound.
This turns the DSP effect applied to the microphone sound ON or OFF.
This selects the type of DSP effect to be applied to the microphone sound.
This sets the depth of the DSP effect applied to the microphone sound.
Set each parameter.
If necessary, use the [BACK]/
[NEXT] buttons to call up the Talk
Setting display.
Settings in the Talk Settings display
are automatically saved to Flash
ROM when you exit from the dis-
play. However, if you turn the
power off without exiting from this
display, the settings will be lost.
MIC
EFFECT
If necessary, press the
[BACK]/[NEXT] button to
call up the Microphone
F
Overall Settings display.
G
H
I
J
Select the row at which
the desired parameters
are located by pressing
the corresponding LCD
button.
• The settings on the Talk Setting
display can be saved to the User
or Disk drive on the [FUNCTION]
→ UTILITY → SYSTEM SETUP
display as a System Setup file
(page 65)
Settings in the Microphone
Overall Settings display are
automatically saved to Flash
ROM when you exit from the
display. However, if you turn
the power off without exiting
from this display, the settings
will be lost.