Yamaha Tyros2 Owner's Manual page 58

Quick Guide
Recording Your Performances and Creating Songs—Song Recording
3
Make the desired panel settings for your keyboard performance.
(Refer to the list of possible settings in step #3 of Quick Recording
above.)
4
Start recording.
Recording is started in the same way as in Quick Recording.
5
Press the [REC] button to stop recording.
6
Listen to your newly recorded performance.
Press the [STOP] button so that the song playback position returns back to the top, then
press the SONG CONTROL [PLAY/PAUSE] button.
7
If desired, record another channel.
Repeat steps #2–#6 above.
8
Make sure to save the song data to the USER or USB drive when
recording is completed.
Call up the USER or USB page of the Song selection (Open/Save) display and execute
the save. For details, see step #8 on page 56.
■ Re-recording or editing the already-recorded song
Here in the "Quick Guide," you've learned how to create a new song by recording. The
following features of the Song Creator function allow you to re-record or edit the already-
recorded song.
● Re-recording a specific section of the already-recorded song (Punch In/Out) .................. Page 121
● Editing the recorded data for each channel
• Quantizing, or aligning the timing.............................................................................. Page 123
• Deleting the data of the specified channel ................................................................ Page 123
• Mixing (Merging) the data of the specified two channels .......................................... Page 124
• Transposing the recorded note data of each channel............................................... Page 124
• Initial settings such as voice, volume, tempo and so on ........................................... Page 124
● Editing the chord data by using the Event List................................................................... Page 125
● Editing the channel data by using the Event List ............................................................... Page 127
● Editing the System Exclusive message data by using the Event List................................ Page 133
● Editing the lyric data by using the Event List ..................................................................... Page 133
58
Tyros2 Owner's Manual
NOTE
• When recording without style play-
back, using the Metronome func-
tion (page 193) can make your
recording sessions much more
efficient.
CAUTION
• The recorded song will be lost if
you change another song or
you turn the power off without
executing the save operation in
step #8. Make sure to execute
the save operation in step #8.
..............................