Yamaha Tyros2 Owner's Manual page 207

■ Wireless LAN .......................................................................................
For a wireless LAN setup, make sure to set both the LAN settings (page 206) and the
Wireless LAN settings below.
Access point
SSID
Channel
Encryption
WEP key type/WEP key length/WEP key
■ Others ..................................................................................................
Proxy server/Proxy port/Non-proxy server
Delete cookies
Delete all bookmarks
Initialize setup
Connect information
Connecting the Tyros2 Directly to the Internet
Make a written note of the settings here, in case you
have to enter them again.
SSID
Channel
Encryption
WEP key type
WEP key length
WEP key
Select an access point from the access point list. When you select an access
point from the list by using the [B]/[C] button, the SSDI and channel are automat-
ically set. If you select an encrypted access point (with key icon), enter the WEP
key type, WEP key length and WEP key after exiting from the access point list.
Determines the SSID setting.
Determines the channel.
Determines whether or not the data is encrypted.
These settings are available only when Encryption above is enabled. These set
the type and length of the encryption key.
Determines the proxy server name, port number and the host name for the non-
proxy server. The settings here are only necessary when using a proxy server.
When using a non-proxy server, enter a separator (comma) between each
server name.
Deletes the contents of all saved cookies.
Deletes all saved bookmarks.
Restores all settings in the Internet Settings displays to their defaults. See "Ini-
tializing Internet Settings" on page 208.
Shows detailed information on the current connection.
Reference
207
Tyros2 Owner's Manual