Split Point - Yamaha Tyros2 Owner's Manual

Reference
Style Playback (Auto Accompaniment)
■ Section Set
.................................................................................................................................
Determines the default section that is automatically called up when selecting different styles (when style
playback is stopped). When set to "OFF" and style playback is stopped, the active section is maintained
even if the different style is selected.
When any of the Main A-D sections is not included in the style data, the nearest section is automatically
selected. For example, when Main D is not contained in the selected style, Main C will be called up.
■ Tempo
...........................................................................................................................................
Determines whether the current tempo is maintained (HOLD) or is reset to the default tempo of a newly
selected style (RESET) when you select other style in a middle of style playback.
■ Part On/Off
..................................................................................................................................
Determines whether the current Part on/off settings are maintained (HOLD) or all parts are reset to on
when you select another style.
Simultaneously Playing a Song and a Style
When playing back a song and a style at the same time, channels 9–16 of the song data are replaced
with style channels—allowing you to use the styles and features in place of the accompaniment parts
of the song. This provides added flexibility to your performance, letting you independently control
style playback and song playback.
NOTE
• The style stops when you stop the song. If the accompaniment style is playing and you
start the song, the accompaniment automatically stops.
• Some of the songs have been created using the built-in styles. For these songs, the styles
are automatically started when starting song playback.

Split Point

These are the settings (there are three Split Points) that separate the different sections of the keyboard: the Chord
section, the LEFT part section, the RIGHT 1-2 section and RIGHT 3 section. The three Split Point settings
(below) are specified as note names.
• Split Point (S)—separates the Chord section for style playback from the section(s) for playing voices
(RIGHT 1-3, LEFT).
• Split Point (L)—separates the two sections for playing voices, LEFT and RIGHT 1-3.
• Split Point (R)—separates the two sections for playing the Right voices (Right 1-2, Right 3).
To set the split point, use the corresponding [1]–[6] LCD buttons (along with the data dial, if desired), or use
the [F]–[I] buttons to select the desired part ("S + L" lets you adjust both Style and Left together), then rotate
the [DATA ENTRY] dial, or press the desired key on the keyboard while holding the [F]–[I] buttons.
●Setting the Split Point S and L to the same note
Split Point (S+L)
Chord section
+ Voice LEFT
Split Point (L) cannot be set lower than Split Point (S), and Split Point (S) cannot be set higher than Split
Point (L).
158
Tyros2 Owner's Manual
Voice RIGHT 1–3
●Setting the Split Point S, L, and R to different notes
Split Point (L)
Split Point (S)
Voice LEFT
Chord section
Split Point (R)
Voice
Voice RIGHT 1–2
RIGHT 3