Yamaha Tyros2 Owner's Manual page 192

Reference
Making Global and Other Important Settings—Function
■ TYPE
.......................................................................................................................................................................
The Harmony/Echo types are divided into the following groups, depending on the particular effect applied.
Harmony Types
These types apply the harmony effect to
the note in the right-hand section of the
keyboard according to the chord speci-
fied in the left-hand section of the key-
board. (Please note that "1+5" and
"Octave" settings are not affected by the
chord.)
Multi Assign
This type apply the special effect to the
chord played in the right-hand section of
the keyboard.
● Harmony Types
When any of the Harmony Types is selected, the Harmony effect is applied to the note played in the right-hand section of the
keyboard according to the type selected above and the chord specified in the chord section of the keyboard shown below.
Split Point
Chord section for
style playback and
Harmony effect
Split Point
(for style playback)
Chord section for
style playback and
Harmony effect
● Echo Types
When any of the Echo Types is selected, the corresponding effect (echo, tremolo, trill) is applied to the note played in the right-hand
section of the keyboard in time with the currently set tempo, regardless of the [ACMP] and the LEFT part on/off status. Please note
that two notes held on the keyboard are played alternately when Trill is selected.
● Multi Assign Type
Multi Assign automatically assigns notes played simultaneously on the right-hand section of the keyboard
to separate parts (voices). For example, if you play three consecutive notes, the first is played by the
RIGHT 1 voice, the second by the RIGHT 2 voice, and the third by the RIGHT 3 voice. The Multi Assign
effect is not affected by the [ACMP] and LEFT part on/off status.
■ Related parameters
● VOLUME
Determines the level of the harmony/echo notes generated by the Harmony/Echo effect. This parameter is available
for all types with the exception of "Multi Assign."
● SPEED
Determines the speed of the Echo, Tremolo, and Trill effects. This parameter is only available when Echo, Tremolo,
or Trill is selected in Type above.
● ASSIGN
This lets you determine the keyboard part via which the harmony/echo notes will be sounded. This parameter is
available for all types with the exception of "Multi Assign."
● CHORD NOTE ONLY
When this is set to "ON," the Harmony effect is applied only to the note that belongs to a chord played in the chord section of the
keyboard. This parameter is not available only for the Harmony type above.
● TOUCH LIMIT
Determines the lowest velocity value at which the harmony note will sound. This allows you to selectively apply the harmony by
your playing strength, letting you create harmony accents in the melody. The harmony effect is applied when you play the key
strongly (above the set value). This parameter is available for all types with the exception of "Multi Assign."
192
Tyros2 Owner's Manual
Split Point
(for the voice)
RIGHT 1–3 voices
LEFT voice
Echo Types
These types apply the echo effect to the note
in the right-hand section of the keyboard in
time with the currently set tempo.
Split Point
RIGHT 1–3 voices
LEFT voice and
chord section for
Harmony effect
RIGHT 1
RIGHT 2
RIGHT 3