Yamaha Tyros2 Owner's Manual page 222

Appendix
Installing an Optional Hard Disk
5
Attach the hard disk unit to the hard disk cover using the included four screws.
6
Replace the hard disk drive and cover (included with the hard disk) by fitting it into the
Tyros2 as shown in the illustration.
Make sure not to
bend the pins.
7
Attach the hard disk cover with the screw removed in step #4.
8
Replace the cover and attach it with the four screws removed in step
#3.
9
Check that the installed hard disk is functioning properly.
222
Tyros2 Owner's Manual
You should tighten these two
screws first.
Make sure the bottom of the hard disk is
facing up. Depending on the type of hard
disk drive you plan to install, select holes
(A) or holes (B) to attach the hard disk
drive.
* Holes (A) are used in this illustration.
These four pins are unused.
If the HD drive tab appears on the
Open/Save display, the hard disk is
OK. If the drive has multiple parti-
tions, these will be shown as different
HD drive tabs in the display.
NOTE
• If you have installed the hard disk that
was once used for the PSR-9000/
9000Pro/Tyros and turn the Tyros2's
power on, you can immediately view
the files on the hard disk and use the
song files from the PSR-9000/
9000Pro/Tyros. However, to properly
use the style, Multi Pad, and Registra-
tion Memory files from the PSR-9000/
9000Pro/Tyros, you will need to con-
vert the data using a computer and the
File Converter software (available for
free download on the Tyros2 website).