Copying Folders/Files (Copy & Paste); Moving Files (Cut & Paste) - Yamaha Tyros2 Owner's Manual

Basic Operations—Organizing Your Data
Folder/File Operations using the Open/Save Display
Copying Folders/Files (Copy & Paste)
Folders and files can be freely copied among the installed drives, with the exception of the Preset drive—data can be copied from
the Preset drive, but not to it. The basic procedure is described below; for a specific example (using Voices), see page 29 in the
Quick Guide.
1
Call up the page (path) of the Open/Save display, where the relevant fold-
ers/files are located.
2
Press the [COPY] LCD button (lower [3] button) at the bottom the LCD
display.
The pop-up window for the copy operation appears at the bottom of the LCD display.
To return to the original display, press the [CANCEL] LCD button.
3
Select the desired folders/files to be copied.
Press the LCD letter button that corresponds to the desired folder/file. Several files/
folders can be selected together, even those from other pages. Press the [ALL] LCD
button (lower [6] button) to select all the folders/files indicated on the current display
including the other pages. When the [ALL] LCD button (lower [6] button) is pressed,
[ALL] changes to [ALL OFF] letting you release or cancel the selection.
4
Press the [OK] LCD button (lower [7] button) to return to the Open/Save
display.
5
Call up the destination display.
The Preset drive cannot be selected as the destination. Create a new folder (page 73) at
the destination page (path) as needed.
6
Press the [PASTE] LCD button (lower [4] button).
The folders/files copied from the source page (path) appear on the display.
Moving Files (Cut & Paste)
Files can be freely moved among the installed drives, with the exception of the Preset drive—data can be copied and moved from
the Preset drive, but not to it.
1
Call up the page (path) of the Open/Save display, where the relevant files are located.
2
Press the [CUT] LCD button (lower [2] button) at the bottom the LCD display.
The pop-up window for the Cut operation appears at the bottom of the display. To return to the original
display, press the [CANCEL] LCD button.
3
Select the desired files to be moved.
The operation is the same as in step #3 of "Copying Folders/Files (Copy & Paste)." See above.
4
Press the [OK] LCD button (lower [7] button) to return back to the Open/Save display.
5
Call up the destination display.
The Preset drive cannot be selected as the destination. Create a new folder (page 73) at the destination
page (path) as needed.
6
Press the [PASTE] LCD button (lower [4] button).
The files moved from the source page (path) appear on the display.
74
Tyros2 Owner's Manual