Subscribe to Our Youtube Channel
Related Manuals for Glow Bricks Lego The botanical Garden 21353
Summary of Contents for Glow Bricks Lego The botanical Garden 21353
- Page 2 Take lighting part A to assemble at the entrance...
- Page 3 Detach the shown parts from the entrance, assemble the lighting plate with round blocks attached (please follow the position and direction same as the picture below) Assemble the other lighting plate with connector attached first...
- Page 4 Restore the windows first and place the wire in between the studs Restore the remain part and replace the clear round blocks on the lamps by the lighting parts...
- Page 5 For the remain 1x4 lighting plate, assemble it under the platform at the end Please assemble it exactly same as the one in picture otherwise it would be blocked by the parts under of the platform Place the wire at the ground and cover by the stairs...
- Page 6 Leave the plug outside to connect with lighting part B later Lift up the top and take the lighting part B, get the end with connector and 1x2 lighting plate attached to attach it on the corner then assemble the other 1x2 lighting plate...
- Page 7 Remove the plate from the inner corner shown then assemble the 1x10 lighting plate in the middle and restore the plate to stable the wire Then do the same procedure for the other side...
- Page 8 Connect the plugs with lighting part A and place the other connector to the back then you can close the top Assemble lighting part C to the side of the garden with the tree...
- Page 9 Remove the flowers shown then assemble the lighting pink round plates on the leaves Place the wire under the flowers in red circle then stick the brown lighting tiles under the windows, take away the parts to let the wires get through first...
- Page 10 Replace the diamond by the lighting plates, then restore the flowers removed at the previous steps The 1x6 lighting plate would be assembled inside the house...
- Page 11 To move the lighting plate inside, remove the window then place the wire under the plate Restore the windows afterward and assemble the lighting plate...
- Page 12 Replace the clear part by the lighting part and place the connector to the back Assemble the remain lighting round plates on the tree...
- Page 13 Spread the lighting round plates on the tree evenly and mostly facing at the front...
- Page 14 The lighting part D would be assembled on the other side of the garden Remove the flowers and assemble the pink lighting round plates...
- Page 15 Stick the brown lighting tiles under the windows and replace the diamonds by the same way as the previous one...
- Page 16 Open a gap at the clear blue dish at each level of the fountain and place the led bulbs inside of it...
- Page 17 Then place the blue lighting round plate on top of the fountain Assemble the 1x6 lighting plate inside the house...
- Page 18 Replace the clear part of the lamp by the lighting part then place the connect at behind of the house At last, connect all three connectors to the USB cable then you can light it up...
Need help?
Do you have a question about the Lego The botanical Garden 21353 and is the answer not in the manual?
Questions and answers