Subscribe to Our Youtube Channel
Related Manuals for Glow Bricks 21054
Summary of Contents for Glow Bricks 21054
- Page 2 First of all, split the whole building to 3 separate parts, then take this lighting part for the left side building Take off the top L-shaped top, remove the 2x3 and 2x4 plates and replaced by the lighting parts (beware the direction of the wire)
- Page 3 Install the 1x8, 1x2 and 1x1 as shown Restore the L-shaped top, remove the squared top and install one of the 1x4 plate...
- Page 4 Then install the rest 2 1x4 plates, and this part would be finished Now it’s turn for the right-handed side, take this lighting part out...
- Page 5 Remove the L-shaped top and install the 1x4 at the end as shown Put the top back, remove the other 2 tops and install the rest plates like this Restore the top then this part is done...
- Page 6 Now it’s turn for the middle building Remove the top first...
- Page 7 Then install the lighting plates Then stick the lighting bar as shown...
- Page 8 Put the top back and remove the following parts Then stick the short lighting bar here...
- Page 9 Adjust the wire and pull the lighting round plate to the front Install the lighting round plate then restore all the parts removed...
- Page 10 At last combine all the buildings and connect the with the USB cable and that’s done For more AMAZING LED Light Kits visit www.brickloot.com...
Need help?
Do you have a question about the 21054 and is the answer not in the manual?
Questions and answers