Using Your Printer With A Macintosh; Installing Printer Driver For Macintosh; Uninstalling The Printer Driver - Xerox Phaser 3600 User Manual

9
Using Your Printer with a
Macintosh
Your printer supports Macintosh systems with a built-in USB
interface or 10/100 Base-TX network interface card. When you
print a file from a Macintosh computer, you can use the driver by
installing the PPD file.
N : Some printers do not support a network
OTE
interface. Make sure that your printer supports a
network interface by referring to Printer Specifications
in your Printer User's Guide.
This chapter includes:

• Installing printer driver for Macintosh

• Setting Up the Printer
• Printing
Installing printer driver for
Macintosh
The PostScript driver CD-ROM that came with your machine
provides you with the PPD file to use the PS driver, Apple
LaserWriter driver, for printing on a Macintosh computer.
1
Connect your machine to the computer using the USB
cable or the Ethernet cable.
2
Turn on your computer and the machine.
3
Insert the PostScript driver CD-ROM which came with your
machine into the CD-ROM drive.
4
Double-click CD-ROM icon that appears on your
Macintosh desktop.
5
Double-click the MAC_Installer folder.
6
Double-click the MAC_Printer folder.
7
For Mac OS 10.2 or higher, double-click the Xerox
Phaser 3600_OSX icon.
8
Enter the password and click OK.
9
Click Continue.
10
Select Easy Install and click Install.
11
After the installation is finished, click Quit.
32

Using Your Printer with a Macintosh

Uninstalling the printer driver

1
Connect your machine to the computer using the USB
cable or the Ethernet cable.
2
Turn on your computer and the machine.
3
Insert the PostScript driver CD-ROM which came with your
machine into the CD-ROM drive.
4
Double-click CD-ROM icon that appears on your
Macintosh desktop.
5
Double-click the MAC_Installer folder.
6
Double-click the MAC_Printer folder.
7
For Mac OS 10.2 or higher, double-click the Xerox
Phaser 3600_OSX icon.
8
Select Uninstall and then click Uninstall.
9
Click Continue.
10
When the uninstallation is done, click Quit.