Information Menu; Layout Menu - Xerox Phaser 3600 User Manual

Information menu

This menu contains printer information pages that give details about the
printer and its configuration.
Item
Menu Map The menu map shows the layout and current
settings of the control panel menu items.
Configuraton The configuration page shows the printer's
current configuration. See page 8.1.
Demo Page The demo page allows you to check if your
printer properly performs printing. See
page 2.9.
PCL Font List The font sample list shows all of the fonts
PS3 Font List currently available in the selected language.
FlashDirectory You can print the list pages about all of fonts
and macros which you downloaded into the
machine.
EPSON Font The font sample list shows all of the fonts
currently available in the selected language.
Secure Print menu
Use the Secure Print menu to print or delete a secured page. The
passcode is validated against the one submitted with the page.
Note
This item is available when the installed memory is larger than
128 MB.
Item
Release To print a protected page, enter passcode for
the page. The page will be printed only when
both user name and the passcode is validated.
If the Release All item in Secure Print of
System Setup menu is set as On, all files
which match with both user name and
passcode are printed out.
Delete To delete a protected page, enter passcode for
the page. Only if the passcode is validated, the
page will be deleted.
Explanation
Explanation

Layout menu

Use the Layout menu to define all settings relating to output.
Item
Orientation
Values: Portrait, Landscape
Choose the default orientation of the print image
on the page.
Simplex Set the margin of print materials for one-sided
Margin printing. You can increase or decrease the value in
0.1 mm increments. The margins may differ
according to the paper size and printing
orientation.
You can select the unit either millimeters or inches.
See Cm or inches item on page 2.7 to configure
the unit.
• Top Margin: Set the top margin, from 0.0 to
250 mm.
• Left Margin: Set the left margin, from 0.0 to
164 mm.
2.2
<System setup>
Explanation
Portrait Landscape