Xerox Phaser 3600 User Manual page 79

T
: If you want to set a specific IP address on a specific
IP
network printer, click the Set IP Address button. The Set IP
Address window appears. Do as follows:
a. Select a printer to be set with a specific IP address from the
list.
b. Configure an IP address, subnet mask, and gateway for the
printer manually and click Configure to set the specific IP
address for the network printer.
c. Click Next.
6
Select the components to be installed and click Next.
7
You can also change the printer name, set the printer to be
shared on the network, set the printer as the default printer,
and change the port name of each printer. Click Next.
9
Installing Printer Software in Windows
To install this software on a server, select the Setting up
this printer on a server checkbox.
8
After the installation is finished, a window asking you to
print a test page appears. If you choose to print a test
page, select the checkbox and click Next.
Otherwise, just click Next and skip to step 10.
9
If the test page prints out correctly, click Yes.
If not, click No to reprint it.
10
Click Finish.
N : After setup is complete, if your printer driver doesn't
OTE
work properly, reinstall the printer driver. See "Reinstalling
Printer Software" on page 10.