Xerox Phaser 3600 User Manual page 43

3 With a dry lint-free cloth, wipe away any dust and spilled toner from
the print cartridge area and the print cartridge cavity.
Caution
While cleaning the inside of the printer, be careful not to touch
the transfer roller, located underneath the print cartridge. Oil
from your fingers can cause print scan quality problems.
4 Locate the long strip of glass of LSU (Laser Scanning Unit) inside
the top of the cartridge compartment, and gently swab the glass to
see if dirt turns the white cotton black.
5 Reinsert the print cartridge and close the top cover.
6 Plug in the power cord and turn the printer on.
Printing a cleaning sheet
If you are experiencing blurred, faded, or smeared printouts, you can
clear the problem by printing a cleaning sheet, provided by your printer.
You can print:
• OPC (Organic Photo Conductor) Cleaning sheet: cleans the OPC
drum of the print cartridge.
• Fuser Cleaning sheet: cleans the fuser unit inside the printer.
1 Make sure that the printer is turned on with paper loaded in tray.
2 Press Menu until System Setup appears on the bottom line of the
display and press OK.
3 Press the Up/down arrow buttons until Maintenance appears and
press OK.
4 When Clean Drum appears, press OK.
Or, press the Up/down arrow buttons until Clean Drum
Fuser appears and press OK.
Your printer automatically picks up a sheet of paper from the tray
and prints out a cleaning sheet with dust or toner particles on it.
8.2
<Maintenance>
Clean
or