Uniden MYSTIC Owner's Manual page 72

Mystic OM.book Page 70 Wednesday, October 22, 2003 8:59 PM
Customizing the Map Items
a. Press [MENU] from the Map display.
b. Use
c. Use
d. Use
you want to display. If you select
Mark All, all items will be displayed
on the Map. If you select Clear All,
no items will be displayed on the
Map.
If you want to display only certain
items, use
each item, and press [ENTER]. If
the item was checked, the check
mark will be removed. If the item
was not checked. a check mark will
appear.
e. When you have completed your
selection, press [ESC].
Customizing the Map Data Fields
To customize the data fields, you must be in the Position Mode of
the Map screen. If you are in the Cursor Mode, press [ESC] to
change the display back to the Position Mode. (If you are not sure
which Mode you are in, look at the Map. An arrow indicates Posi-
tion Mode and a cross hair indicates Cursor Mode. If you press
[ESC] and the display changes to another Navigation Screen, you
were in the Position Mode. You now need to continue to press
[ESC] until you return to the map.
and to select
Map Setup
or to select the
Display
and to select the options
and to move to
70
and press [ENTER].
tab.