Light Timer; Clear Memory - Uniden MYSTIC Owner's Manual

Mystic OM.book Page 61 Wednesday, October 22, 2003 8:59 PM
Daylight Savings
You can select the Region you are in to have the MYSTIC
automatically adjust the time displayed to compensate for Daylight
Savings time. You can select United States (Daylight Savings starts
on the first Sunday of April and ends on the last Sunday of October),
European Union (Daylight Savings starts on the last Sunday in March
and ends on the last Sunday in October), or you can customize to set
the month and day that Daylight Savings starts and ends where you
are. The default will be automatically selected during startup when
you use your MYSTIC for the first time.

Light Timer

Allows you to set the time interval that the display backlight is off when
not in use. Times available are: 5 seconds, 10 seconds, 30 seconds, 1
Minute, 2 Minutes, 4 Minutes, 10 Minutes or Timer Off. The default is
4 Minutes.
Beeper
You can select which actions will cause the beeper to sound. You can
choose from Off, Keys Only (pressing a key causes a beep), Alarms
Only (when an alarm is activated) or Keys & Alarms. The default is
Keys & Alarms.

Clear Memory

You can clear the information in memory if you want to store other
information instead. This may be useful if you are approaching the
limit of the MYSTIC memory. for example, you may want to clear the
Waypoints you have stored. You can clear: Track history, Wpts/Routes
(Waypoints and Routes), Routes, FIPS, Directory, Restore Ch TAGs,
Distress Call Log, Individual Call Log, Reset default, or All memory.
You can also reset the MYSTIC to all default settings.
Note: When you press [ENTER] to clear any of the selections, you
will see a Warning message asking you to verify that action.
Use or to select or
Yes
61
and press [ENTER].
No