Nav Screens; Coord System - Uniden MYSTIC Owner's Manual

Mystic OM.book Page 59 Wednesday, October 22, 2003 8:59 PM
Simulate
If you select
Simulate
MYSTIC appear to operate. However, the readings are simulated, not
real time data. You can simulate operations in one of two Modes:
automatic, or manual. In either Mode, Track History will be cleared.
1. Select
Simulate
2. At the
Simulate Menu
[ENTER].
a. If you select
heading and speed.
b. If you select
simulated heading and speed.
3. To turn off

Nav Screens

You can determine which navigation screens are displayed by
selecting them individually from this Menu. The default is all screens
On. Each time you press [ENTER], you see one of the navigation
screens and a selection list. Select either
screen displayed or not. When you have finished with all navigation
screens, you are returned to the

Coord System

Allows you to set the coordinate system that will be used to display
the position for the primary or secondary position screen. The
available coordinate systems are: Lat/Lon, UTM, OSGB, Irish, Swiss,
Swedish, Finnish, German, French, USNG, MGRS, or User Grid. The
default for the primary position screen is Lat/Lon DEG.MIN.MMM. The
default for the secondary position screen is UTM ((Universal
Transverse Mercator.
, all the features and the functions of the
and press [ENTER].
, select
, the MYSTIC will function with a predefined
Auto
, you will be asked to define a desired
User
, select
Simulate Off
Setup Menu
59
or and press
Auto User
and press [ENTER].
or to have that
On Off
.