Making A Position Send Call; Receiving A Position Send Call - Uniden MYSTIC Owner's Manual

Mystic OM.book Page 93 Wednesday, October 22, 2003 8:59 PM
2. If the Position Reply is set to Manual, you can press any key. The
Attention
and press [ENTER] to reply to the call. Or, select
[ENTER] to cancel the reply.

Making a Position Send Call

This radio has the ability to send the position of your vessel to another
vessel using a VHF marine radio equipped with DSC.
1. Press [CALL/LIGHT].
2. At the
DSC Menu
Press [ENTER].
3. At the
Position Send
individual from the Directory you want to send your position to.
Note: You must have entries in your directory to make a Position Send
Call. See the Setup Section (page 35.)
4. Press [ENTER]. You will see the
to select
Yes
and press [ENTER] to cancel the call.
5. After the call is made, the radio returns to the

Receiving a Position Send Call

1. When your MYSTIC receives a Position Send Call, the DSC
Routine tone or DSC distress tone sounds. The Position Send
screen appears, displaying the calling ship's message category,
MMSI, time and position information.
2. Press [ESC]. The Map screen will now be displayed, with the
calling ship's location marked on the map.
screen will be displayed. Use
, use and to select
screen, use
Attention
and press [ENTER] to make the call. Or, select
93
or to select
Yes
and press
No
.
Position Send
and to select the
screen. Use or
No
screen.
VHF